Extrem Opinion 108 Reload 2018/2019
Based on the same modern geometry as Second Opinion 108, but with more powerful titanal construction. This model suits skiers that like the playful shape of Opinion, but are looking for a more dampened feeling, more edge grip and to be able to ski harder in more demanding snow conditions.
The construction of Opinion 108 Reload is a further development of the very popular model Opinion 108 Charger. To this winter, the ski has a more powerful wood core made of snappy poplar wood and stable beech wood. At the same time, we have decreased the width of the two layers of titanal. The race rubber dampening in tip and tail is still there to minimize vibrations.
The new construction remains dampened and stable in high speed. However, we have decided to decrease the torsional stiffness in the tip and tail section of the ski. This makes it easier when skiing the trees and less aggressive on edge in varying offpiste conditions such as wind-packed snow. The harmonious tapered tip and tail, combined with the long low-rise rocker profile, creates fantastic floatation in powder and makes them easy to manoeuvre in all conditions.
Allmountain tip and tail rocker
найти похожие модели →
Allmountain tip and tail rocker A profile with low tip and tail rocker, combined with minimum camber. The tip and tail rocker gives a ski that is super easy to ski on hardpacked and add float on the softer days. The camber increases the stability and versatility of the ski. |
|
Developed and handcrafted in åre
найти похожие модели →
Developed and handcrafted in Åre All Extrem skis are developed and handcrafted with pride in our top modern factory in Åre, Sweden |
|
Double layers of titanal
найти похожие модели →
Double layers of titanal Using double layers of titanal increases performance on hard packed snow significantly. The skier will get superior edge grip and high speed stability. |
|
Extra thick abs sidewalls
найти похожие модели →
Extra thick ABS sidewalls We use extra thick ABS sidewalls on all Extrem skis, simply because we want our skis to be super durable. |
|
Extra thick steel edges
найти похожие модели →
Extra thick steel edges We use extra thick steel edges on all Extrem skis, because we want our skis to be able to handle tough riding and be grinded over and over again. |
|
Graphite race base
найти похожие модели →
Graphite Race Base We use Okulen Graphite Race Base since we like to go fast! |
|
Lightweight dampening tubecomb
найти похожие модели →
Lightweight dampening Tubecomb Lightweight dampening Tubecomb material in tip and tail for reduced vibrations and low swing weight. |
|
Poplar + beech wood core
найти похожие модели →
Poplar + Beech Wood Core Poplar wood has low density, while beech wood has higher density and absorbs vibrations very good. The mix between the two makes a ski playful, yet stable on hard packed snow. |
|
Rubber dampening
найти похожие модели →
Rubber Dampening Most ski vibrations occur in the tip and tail, and then transmit into the center of the ski. To reduce this we use Rubber Dampening in both tip and tail. |
|
Rubber dampening stringer
найти похожие модели →
Rubber Dampening stringer To decrease the wood core vibrations we put a Rubber Dampening stringer along the full length of the wood core. |
Ростовки | 186 | 193 |
---|---|---|
Ширина носка, мм | 134 | 135 |
Ширина талии, мм | 108 | 108 |
Ширина пятки, мм | 125 | 126 |
Радиус бокового выреза, м | 21 | 22 |
- (?)
SP (ski points) - ски пойнты. Наберите 250 SP и получите недельный скипасс!
Подробнее тут»